Valentini Rambo Series Tractor 3-Point Rock & Stone Crushers,
Soil Stabilizer & Shredder, Asphalt Pulverizer/Grinder
Soil Stabilizer & Shredder, Asphalt Pulverizer/Grinder
Rambo 2300DT Front Gate Closed
RAMBO SERIES STONE CRUSHERS FOR 100-230HP TRACTORS
As with ALL Valentini Crushers, the Rambo Series has been providing Superior Single Pass Results in All Applications: Land Reclamation, Agriculture (Row Crop Fields, Produce Rows, Pastures, Seed Bed Preparation, Horticultural Benches & Rows, Vineyards, Orchards, Groves, etc.), Roadway Maintenance & Paving (Gravel & Chip Seal Roads, Asphalt Roads & Highways), as well as Rough or Finish Grading in Pre & Post Construction Applications. From Rock & Stone Crushing, Stump Mulching, Soil Shredding, to Soil Stabilization, and Asphalt Pulverizing/Grinding, Valentini Crushers Have Been CRUSHING IT for Decades!!! In the Sample Videos Below, You'll See Evidence of the Superior Single Pass Performance, Even Shaving Tops off of the Outcroppings of Embedded Boulders,
Even at Work Crushing & Pulverizing Limestone!
STANDARD FEATURES:
- Category 2, 3-Point Hitch.
- Cam Clutch Protected Main PTO Shaft.
- It Doesn't Get Any Better Than A Cam Clutch, The Most Efficient & Reliable Driveline Protection Available:
- No Maintenance, With Automatic Clearing & Resetting After Locked Rotor Conditions!
- Dual Transmission Models have Slip Clutch Protected Side Drive Shafts.
- It Doesn't Get Any Better Than A Cam Clutch, The Most Efficient & Reliable Driveline Protection Available:
- Crushers 'Diminishing Chamber' is Comprised of the Following:
- Front Shear Bar Provides First Mechanical Contact for Reducing Fragments.
- Rear Hardox Grid Provides Secondary Contact for Further Framentary Reduction.
- Hydraulically Controlled Rear Containment Door Controls Duration Fragments Remain in Chamber.
- Containment Door Constructed for Extreme Service Duty & Wear Resistance.
- Crusher Body Internal Hardox Lining is Replaceable.
- Hydraulically Controlled Front Opening Gate & Deflectors for Infinite Adjustment.
- Keep Front Gate Closed for Max Deflector use, or Open For Max Working Depth.
- Extreme Service Duty Rotor is Shock & Wear Resistant.
- 25" Rotor Working Diameter, Tip to Tip.
- 1" Diameter Tooth Shanks & Holders.
- Tooth 'Holders' are Welded to the Rotor.
- Teeth are Fixed in Holders with Snap Rings for Easy Service!
- Central & Side Gear Drives in Oil Bath Gearboxes.
- Single Transmission Units Have Oil Bath Bearing Enclosures for Non-Drive Side.
- Dual Transmission Units have Oil Bath Gearboxes on Both Sides.
- Unique & Patented Labyrinth Seals Ensure Bearings are Protected from Dirt!
- Hydraulically Adjusted Rear Skid Shoes.
- Safety Covers & Guards.
Rambo 2300DT Front Gate Open
Rambo 2300DT ISO View, Front Gate Closed
Rambo 2300DT ISO View, Front Gate Closed
Rambo 2300DT ISO View, Front Gate Open
Rambo 2300DT with Hydraulically Controlled Packer Roller
Rambo 2300DT with Hydraulically Controlled Packer Roller
Rambo 2300DT with Hydraulically Controlled Packer Roller
Rambo 2000 Grinding Limestone Outcroppings
Limestone Outcroppings in Foreground, Stockpiled Rocks Removed the Old Fashioned Way in Backround
Rambo 2000’s ‘Efficiently’ Reclaimed Land Results
Rambo 2000 Grinding Limestone Outcroppings
Rambo 1000 Grinding High Concentration of Large Rocks in Vineyard Rows
Rambo 1300 Efficiently Reclaiming Open Fields
| RAMBO SERIES CRUSHER SPECIFICATIONS | ||||||
|---|---|---|---|---|---|---|
| MODEL | 1000 | 1300 | 1500 | 1800DT | 2000DT | 2300DT |
| Tractor Horsepower | 100-150HP | 110-150HP | 130-150HP | 140-230HP | 150-230HP | 160-230HP |
| PTO Speed | 540 RPM | 540 RPM | 540 RPM | 1000 RPM | 1000 RPM | 1000 RPM |
| Rotor Speed | 236 RPM | 259 RPM | ||||
| Working Width | 42" | 52" | 62" | 72" | 82" | 92" |
| Overall Width | 56" | 66" | 76" | 86" | 96" | 105" |
| Quantity of Teeth | 88 | 106 | 124 | 142 | 160 | 178 |
Working Depth on Non-Passive Surfaces(e.g. Asphalt, Sheets of Granite, etc.) |
6" | |||||
Working Depth on Passive Surfaces(e.g. Dirt, Gravel, Sod, etc.) |
10" | |||||
| Weight | 3,483 lbs. | 3,671 lbs. | 4,079 lbs. | 5,622 lbs. | 5,798 lbs. | 6,063 lbs. |
| Weights are Less Pallets, Crates & PTO Shaft. | ||||||
| (DT) Denotes Double Transmission | ||||||
| RAMBO SERIES CRUSHER SPECIFICATIONS | ||||||
|---|---|---|---|---|---|---|
| MODEL | 1000 | 1300 | 1500 | 1800DT | 2000DT | 2300DT |
| Tractor Horsepower | 100-150HP | 110-150HP | 130-150HP | 140-230HP | 150-230HP | 160-230HP |
| PTO Speed | 540 RPM | 540 RPM | 540 RPM | 1000 RPM | 1000 RPM | 1000 RPM |
| Rotor Speed | 236 RPM | 259 RPM | ||||
| Working Width | 42" | 52" | 62" | 72" | 82" | 92" |
| Overall Width | 56" | 66" | 76" | 86" | 96" | 105" |
| Quantity of Teeth | 88 | 106 | 124 | 142 | 160 | 178 |
Working Depth on Non-Passive Surfaces(e.g. Asphalt, Sheets of Granite, etc.) |
6" | |||||
Working Depth on Passive Surfaces(e.g. Dirt, Gravel, Sod, etc.) |
10" | |||||
| Weight | 3,483 lbs. | 3,671 lbs. | 4,079 lbs. | 5,622 lbs. | 5,798 lbs. | 6,063 lbs. |
| Weights are Less Pallets, Crates & PTO Shaft. | ||||||
| (DT) Denotes Double Transmission | ||||||
Specifications & Designs Are Subject to Change Without Notice